Assembling The Supplied Am Loop; Connecting The Fm And Am Antennas; Connecting The Wire Of The Am Loop; Connecting Power Cable - Yamaha R-S201 Bedienungsanleitung

Connecting the FM and AM
antennas
Indoor antennas for receiving FM and AM broadcasts are
included with this unit. In general, these antennas should
provide sufficient signal strength. Connect each antenna
correctly to the designated terminals.
Note
If you experience poor reception quality, install an outdoor
antenna. Consult the nearest authorized Yamaha dealer or service
center about outdoor antennas.
Outdoor FM antenna
Indoor FM
antenna
(included)
*Outdoor AM antenna
Use 5 to 10 m of vinyl-covered wire extended outdoors from a
window.
**AM loop antenna (included)
• The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.
• The AM loop antenna should be placed away from this unit.
• The wires of the AM antenna have no polarity.
Outdoor AM antenna*
AM loop
antenna
(included)**

■ Assembling the supplied AM loop

antenna

■ Connecting the wire of the AM loop

antenna

Connecting power cable

Plug the power cable into an AC wall outlet after all other
connections are complete.
CAUTION
Only for General model:
Before connecting the power cable, make sure you set
VOLTAGE SELECTOR of this unit according to your
local voltage. Improper setting of VOLTAGE SELECTOR
may cause fire and damage to this unit.
CONNECTIONS
To the AC wall
outlet with the
power cable
11
En