Makita 446 L Betriebsanleitung Seite 6

MAKITA 446 L
english
Tool socket
Maintenance, cleaning and
repair
Accessories and spare parts
4
Use the socket on the vacuum
cleaner for the purpose defined in
the operating instructions only.
Before plugging an appliance into
the appliance socket:
1. Switch off the vacuum clean-
er
Only carry out maintenance
work described in the operating
instructions.
Always pull out the mains plug
before cleaning and maintenance
of the vacuum cleaner.
During maintenance and clean-
ing, handle the vacuum cleaner
in such a manner that there is no
danger for maintenance staff or
other persons.
In the maintenance area
– use filtered compulsory venti-
lation
– wear protective clothing
– clean the maintenance are so
that no harmful substances
get into the surroundings.
Use only the brushes supplied
with the vacuum cleaner or
specified in the operating man-
ual. The use of other brushes
can adversely affect safety.
2. Switch off the appliance to be
connected.
CAUTION!
Follow the operating instructions
and safety instructions for appli-
ances connected to the power
tool socket.
A dust test must be performed at
least once every year by Makita
service or a trained person. This
test includes, for example, wheth-
er there is damage to the filter,
the vacuum cleaner is sealed to
the air and the control equipment
works properly.
Use only original Makita ac-
cessories and spare parts
(see section 9.5). The use of
other parts can adversely affect
safety.