Option Menu; Modelling Light; Zoom Mode; Extended Zoom Mode - Metz mecablitz 52 AF-1 Bedienungsanleitung

11 OPTION menu

11.1 Modelling light

The modelling light is a high-frequency stro-
boscopic flash. It creates the impression of a
semi-permanent light for a duration of about
3 seconds. The modelling light enables the
user to assess light distribution and the
formation of shadows before taking pictures.
The modelling light is triggered with the
manual firing button
Setting procedure
• Press the
for the selection menu to appear.
• Press the
touch display.
• Press the
touch display and select "MOD.LIGHT".
STANDBY
• Press the
MOD.LIGHT
touch display.
AF BEAM
• Press the
the touch display and switch the modelling
light on or off. The setting is adopted
MOD.LIGHT
immediately.
Off
After activation of the modelling light,
"MOD.LIGHT" appears in the INFO menu.
On
.
D
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
MOD. LIGHT
sensor button on the
ON OFF
or sensor button on

11.2 Zoom Mode

11.2.1 Extended Zoom Mode

In extended zoom mode the zoom position of
the reflector is reduced to one level below
the focal length of the camera lens.
The resulting expanded and broader light
coverage provides additional dispersed light
(reflections) inside rooms so that a softer
flash illumination is possible.
Example:
The focal length of the camera lens is 50 mm.
The extended zoom mode sets a 35 mm
reflector position on the flash unit. However,
50 mm continues to be shown on the display.
Setting procedure
• Press the
for the selection menu to appear.
• Press the
touch display.
• Press the
ZOOM SIZE
touch display and select „ZOOM MODE".
ZOOM MODE
STANDBY
• Press the
takes for the selection menu to appear.
D
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
ZOOM MODE
button as often as it
k
171