Info; Auto Off For The Flash Unit - Metz mecablitz 52 AF-1 Bedienungsanleitung

The options can be set after pressing the
OPTION
button.
ZOOM SIZE (shooting format adjustment),
see 11.2.4
ZOOM MODE (illumination),
see 11.2
STANDBY (autom., unit switch-off),
see 3.6
MOD.LIGHT (modelling light), see 11.1
AF BEAM (AF auxiliary light), see 11.3
m / ft (metres / feet), see 11.5
In the menus shown on the flash unit, all
fields that have a black background are confi-
gured as sensor buttons that can be pressed
for modifications/changes in the menu.
In the images in the user's guide, only the
sensor buttons that must be pressed for set-
ting the described function are marked in
black.

3.5 INFO

TTL
The current settings of the flash unit can be
displayed during operation.
-3,9 m
0,3
• Press the
m
Z 35
F8,0
OOM
m
touch display. Info panel 1 appears.
EV
INFO
1
- Spot zoom mode (SP) is set, (see 11.2.2).
+ 2/3
- AF-BEAM (AF auxiliary light) is switched off,
(see 11.3).
- Modelling light (MOD.LIGHT) is set,
(see 11.1).
- The automatic unit switch-off is set for
10 minutes (see 3.6).
- The temperature display increases after
intensive use.
• While info panel 1 is being displayed, press
---------- INFO ----------
the touch display once again.
4 4,0
F
Info panel 2 will be displayed.
435 mm
A.Z
oom
4 400
ISO

3.6 Auto OFF for the flash unit

4 +1
EV
The flash unit is factory-set to automatically
switch to standby mode (Auto OFF) 10 minu-
tes after
• being switched on,
• a flash is fired
• the shutter release is actuated
INFO
sensor button on the
147
k