I-Ttl-Bl Flash Mode - Metz mecablitz 52 AF-1 Bedienungsanleitung

Setting the mode of operation
• Switch on the flash unit with the
button.
The start screen appears. Thereafter, the
52AF-1
flash unit always switches on with the
mode of operation that was used last
NIK
(e.g. M flash mode).
• Press the displayed mode of operation on
M
the touch display as many times as it takes
7,9 m
for the display for selecting the mode of
operation to appear.
m
Z
F4.0
35
OOM
m
INFO 1/1
• Press the
touch display and select the desired mode
TTL
of operation.
M
• Press on the selected mode of operation
that is highlighted in black. The setting is
adopted immediately.
TTL
• Set a suitable mode of operation on the
-7,9 m
0,7
camera, e.g. P, S, A etc.
m
Z
F4.0
35
OOM
m
• Tap the shutter release to transfer data bet-
EV
INFO
ween the flash unit and the camera.
sensor buttons on the

7.2 i-TTL-BL flash mode (

This digital flash mode is only supported by
cameras if lenses are used that transmit
distance data to the camera (for example,
"D-AF Nikkor lens"). When shooting this data
is taken into consideration in addition in
adjusting the flash exposure.
Setting the mode of operation
• Switch on the flash unit with the
button. The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last (e.g. M flash mode).
M
• Set a suitable mode of operation on the
7,9 m
camera, e.g. P, S, A etc.
m
Z
F4.0
35
OOM
• Tap the shutter release to transfer data bet-
m
ween the flash unit and the camera.
INFO 1/1
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
TTL
• Press the
touch display and select
TTL BL
M
• Press the
display.
The setting will take effect immediately.
TTL BL )
sensor buttons on the
TTL BL
.
TTL BL
sensor button on the touch
153
k