Using The Weekly Timer - Mitsubishi Electric PAR-SL100A-E Bedienungshandbuch

4. Operation
0
1
3
2
B
C
A
Fig. 4-1
D
Fig. 4-2
Fig. 4-3
Fig. 4-4
E
Fig. 4-5

4.6. Using the weekly timer

• This function cannot be operated depending on the model
of the indoor unit.
• The weekly timer can be set to 4 operation patterns for
each day of the week.
• The settings include the on and off times and the set
temperature.
• The operation time can be set in 10-minute increments.
<Switching to the editing mode>
Press the
•
<Selecting the setting pattern>
Press the
• Each time the
number A changes in the following order: 1 → 2 → 3 →
4. (Fig. 4-1)
9
<Selecting the day of the week>
7
Press the
5
• Each time the
6
week B changes in the following order: Mon → Tue →
8
Wed → Thu → Fri → Sat → Sun → All days. (Fig. 4-1)
4
<Selecting the operation settings>
1. Press the
•
• Each time the
switches between
2. Press the
• The operation time blinks. (Fig. 4-3)
• Press the
3. Press the
• The set temperature blinks. (Fig. 4-4)
• Press the
• When the AUTO (dual set point) mode is enabled, press
the
E and the lower limit F. (Fig. 4-5)
* When setting the off operation, the temperature cannot
be set.
<Deleting the settings>
Press the
• The displayed day of the week and the pattern number
settings are deleted.
<Transmitting the settings>
Point the transmission area of the wireless remote con-
troller towards the receiver on the indoor unit and oper-
ate the controller.
Confi rm that the indoor unit beeps 7 times.
Press the
F
button 1.
C blinks. (Fig. 4-1)
button 2.
button 2 is pressed, the pattern
button 3.
button 3 is pressed, the day of the
button 4.
D ( ) appears. (Fig. 4-2)
button 4 is pressed, the setting
D and
button 5.
button 7 to set the operation time.
button 6.
button 7 to set the temperature.
button 6 to switch between the upper limit
button 8.
button 9.
.
13