I-See Sensor - Mitsubishi Electric PAR-SL100A-E Bedienungshandbuch

4. Operation
14
<Enabling the weekly timer>
Point the transmission area of the wireless remote con-
troller towards the receiver on the indoor unit and oper-
ate the controller.
Press the button 0.
The weekly timer operates when
• The weekly timer does not function when the on/off timer
is enabled.
• The weekly timer operates when all of the on/off timer
settings have been executed.

4.7. i-See sensor

• This function cannot be operated depending on the model
of the indoor unit.
1 Each time is pressed during operation, the setting
changes in the following order: OFF → Direct → Indirect.
Display
Setting OFF
When the setting is changed from OFF to Direct or Indirect,
the vane setting changes to "Auto". This setting is applied
collectively to all of the vanes.
2 The vanes automatically move relative to the areas where
persons are detected. When a person is detected, the
vanes operate as indicated in the following table.
Direct
Cooling
horizontal → swing
Heating
keep downward
is on.
Direct Indirect
Vane setting
Indirect
keep horizontal
downward → horizontal