Using The On/Off Timer - Mitsubishi Electric PAR-SL100A-E Bedienungshandbuch

4. Operation
4
On time
Timer operation order
Off time
A B
5
1
3
2

4.5. Using the on/off timer

• When setting the timer operation, point the transmis-
sion area of the wireless remote controller towards the
receiver on the indoor unit and confi rm that the indoor
unit beeps when it receives signals from the remote
controller.
■ There are 3 types of timer operation.
• On timer operation: Only the timer to start the operation
is set.
• Off timer operation: Only the timer to stop the operation
is set.
• On/off timer operation: The timers to start and stop the
operation are both set.
■ Only 1 on-timer setting and 1 off-timer setting can be set
for the timer operation within a 24-hour period.
■ The time setting for the timer operation can be set in
10-minute increments.
[Set the time to start the unit as follows]
1. Press the button 4.
• The current time disappears, the on time appears, and
A blinks.
2. Press the button 2 to set the on time.
3. Press the button 3.
• A stops blinking and remains on to indicate that
the setting is complete.
* Even if no operations are performed for 10 seconds,
A stops blinking and remains on to indicate that
the setting is complete.
• If the on timer is set while the air conditioner is operat-
ing, the air conditioner stops.
[Set the time to stop the unit as follows]
1. Press the button 1.
• The current time disappears, the off time appears, and
B blinks.
2. Press the button 2 to set the off time.
3. Press the button 3.
• B stops blinking and remains on to indicate that
the setting is complete.
* Even if no operations are performed for 10 seconds,
B stops blinking and remains on to indicate that
the setting is complete.
11