Safety; Application Compatibility - Mettler Toledo InPro 7000-VP Series Bedienungsanleitung

InPro 7000-VP Series
Each InPro 7000-VP Series sensor is equipped with an integral tempera -
ture probe Pt1000, IEC 751 Class A.
The nominal cell constant is 0.1 cm
sensor label.
For each sensor, the cell constant and temperature constant have been
measured/established individually and the values documented in the ac-
companying Quality Certificate. All calibrations can be traced back to NIST
and/or ASTM Standards.
Both the measuring range and the system measurement accuracy strongly
depend upon which type of transmitter is employed.
Subject to technical changes
Sensor
InPro 7000/7005
InPro 7001
InPro 7002
1 0.01–120 µS/cm
2 0.02– 50 µS/cm
3 0.02–100 µS/cm
2

Safety

2.1

Application compatibility

The wetted material parts of the sensor (several different materials come
into contact with the sample medium) can under some circumstance be
incompatible with the particular composition of the process medium and/or
of the operating conditions. Responsibility to verify application compatibil -
ity lies wholly with the user.
The compatibility of different types of material are outlined on
http://www.coleparmer.com/techinfo/chemcomp.asp.
Mettler-Toledo GmbH, Process Analytics accepts no responsibility what-
soever for the correctness or accuracy of such details.
© 11 / 13 Mettler-Toledo AG, CH - 8606 Greifensee
Printed in USA
Transmitter 7220 X
7
4
5
4 0.02– 200 µS/cm
5 0.02– 500 µS/cm
6 0.02–1000µ S/cm
. The exact value is printed on the
-1
M 700 Cond 7100 e
9 9
5 5
7 7
7 0.02–1.2000µ S/cm
8 0.02–1.2500µ S/cm
9 0.02–10.000µ S/cm
Cond 7050 e
4
2
3
InPro 7000-VP Series
52 002 091
7