Safety Information - Mettler Toledo WKR204C-S Benutzerhandbuch

1 Introduction
1.1 This User Manual
This User manual contains all information for the operator of the product.
Read this User manual carefully before use.
•
Keep this User manual for future reference.
•
Pass this User manual to any further owner or user of the product.
•
1.2 Further documents
In addition to this printed User manual you can download the following documents from
Documentation WKR/WKL
Technical data sheet
•
Installation information (for trained personnel under the control of the operating company)
•
Reference manual for the command set
•
1.3 Manufacturer information
The contact information of the manufacturer of the product is as follows:
Name: METTLER-TOLEDO GmbH
•
Weblink: http://www.mt.com
•
Physical address: Im Langacher 44, 8606 Greifensee, Switzerland
•

2 Safety Information

2.1 Intended use
Use the product only for weighing in accordance with this User manual.
•
The weighing kit is intended for indoor use only.
•
Any other type of use and operation beyond the limits of technical specifications is considered as
•
not intended.
2.2 Definition of signal words and warning symbols
Safety notes are indicated by signal words and warning symbols and contain warnings and
information about safety issues. Ignoring safety notes can lead to personal injury, damage to the
instrument, malfunctions and erroneous results.
Signal words
WARNING
CAUTION
NOTICE
Note
Warning symbols
Weighing Kit
for a hazardous situation with medium risk, possibly resulting in severe injuries or
death if not avoided.
for a hazardous situation with low risk, resulting in damage to the device or the
property or in loss of data or minor or medium injuries if not avoided.
(no symbol)
for important information about the product.
(no symbol)
for useful information about the product.
General hazard
u http://www.mt.com/ind-wkr-support
Electrical shock
3