Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Your model as an AC variant
If you have decided on a LILIPUT model for the central rail alternating current system,
please observe the following:
This model has a digital decoder installed (ESU Lokpilot) which can be used to power your
vehicle either on an analogue basis (16 volt AC) or digitally. Please consult the instructions
for use supplied by ESU for details on how the decoder works. For power pick up from
the central rail, the slider has to be clipped on to the bogey with the aid of a holder R as
shown in Pic. 5. To change the slider, please slightly press apart the retaining arms L of the
holder R using a small screwdriver. This enables the retaining seat of the central slider to be
removed from the holder R.
Picture 5
Warranty Coupon
Should your LILIPUT model be faulty or not work properly or require repair, you can either
contact the dealer from whom you purchased the product or contact the customer services
department directly of one of the following addresses below.
Warranty Conditions:
This LILIPUT model has a warranty of two years from the
date of purchase on repairs and parts, as long as it was
purchased from an authorised dealer and if this certificate
has been stamped with the address of the dealership and
the date of purchase has been entered. The warranty
permits Bachmann Europe Plc either to rectify any fault or
to replace the faulty parts. Further claims are excluded.
Please note that no liability can be assumed for any parts
subsequently fitted or for any damage caused thereby.
BACHMANN EUROPE PLC
R
GREAT BRITAIN
AND ALL OTHER COUNTRIES
( ExEPT GERMAN SPEAKING COUNTRIES )
BACHMANN EUROPE PLC
MOAT WAy, BARWELL
GB - LEICESTERSHIRE LE9 8Ey
12
L
Werbung
