Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BACHMANN EUROPE PLC
5. Installation of a DCC Decoder
The model of the Class E 10 possesses a 21-pin decoder port. Remove the jumper
B (Pic. 3) and attach the digital decoder. Please exactly follow the installation instructions
of the decoder manufacturer. For questions regarding function and installation, please con-
tact the decoder supplier or manufacturer.
S2
B
S2
SPK
S3
LH
Picture 3
6. Locomotive sound
The locomotive is already completely prepared for locomotive sound operation.
Loosen the two screws S2 in Pic. 3 and carefully remove the circuit board. It is advisable to
separate a part of the lines and plugs from the board. Now screw the sound capsule LH by
loosening the two screws S3 and clicking in place a loudspeaker - e.g. from the company
ESU - with d = 20 mm with the membrane facing outwards.
The sound decoder can be inserted vertically instead of the jumper plug B or another de-
coder in the 21-pole connector. Two connection pins SPK (Pic. 3 ) have been mounted on
the circuit board to connect the loudspeaker. It is essential that you follow the instructions
of the decoder and the loudspeaker manufacturer.
10
Werbung
