Power Safe Mode; Energy Safe Mode After Cleaning; Energy Safe In Programming Mode; Resetting Message Grounds Drawer Full - HGZ SCS Power Betriebsanleitung

Switch-on and -off of credit systems
• Press left and right key for 3 sec. then press upwards key.
• Press the right key 3x.
• The connected credit system can be enabled or disabled by using the up and
down keys.
• Press left key, then press any product key to return to the normal operating
mode.
Restore programming datas from the customer memory
The settings programmed by the service technician can be retrieved again at any
time as follows:
• Press left and right key for 3 sec. then press up key.
• Press the right key.
• Press and hold the down key for 5 s.
• Press any product key to return to the normal operating mode.

Power safe mode

Energy safe mode after cleaning

If requested the automatical energy safe switch can be setted by a service techni-
cian.
• The energy safe mode will be automatically activated after cleaning. Display
indicates Cleaning end.
• As soon as an operation will be done on the machine, the energy safe mode will
switch off automatically. The machine must heat up in this case.

Energy safe in programming mode

• Press left and right key for 3 sec.
• After 30 minutes the heaters will switch-off. Display indicates Power save
mode.
• The power saving system is switched-off by pressing a product key. Product dis-
pensing is possible as soon as the Ready message appears in the display.

Resetting message GROUNDS DRAWER FULL

• Take off the grounds drawer and empty it.
• Press and hold stop key.
• Insert grounds drawer. Display indicates OK, that means the counter for the
grounds drawer has been setted to Zero. This is important to avoid that the
grounds drawer will overfill!
• Left the STOP key.
Operating Instructions - SCS Power Operating Instructions - SCS Power
3 s
3 x
3 s
5 s
3 s
red
71 71