Controls And Functions - Klarstein 10029393 Bedienungsanleitung

Controls and Functions

Stand by:
After the fan is powered on, all LEDs will be bright. 1 s later, all LEDs will go out and the
unit will tu m to stand by status.
0N/OFF button:
In standby status, the unit will be turned on after pressing this button and the defaulted running status is gene-
ral wind at the speed of option 1; In the running status, the unit will stop running after pressing this button. The
whole unit will stop running and all lights will go out, then the fan will turn to standby status.
Fan speed button:
In running status, fan speed can be selected by pressing this button. If press this button again successively, you
can select fan speed circularly and the display icon will show the fan speed synchronously.
Mode button:
In running status, fan mode can be selected by pressing this button. If pressing this button successively, you
can select fan mode circularly in the sequence of natural > sleeping > general wind with corresponding icon on
except in general wind mode.
Wind direction button:
In running status, wind direction can be selected by pressing this button. If press this button again successively,
you can select wind direction circularly in the sequence of left&right swing > no swing. When swinging, the
corresponding icon will be bright.
Cooling button:
In running status, cooling function will be started up by pressing this button; the water pump starts running and
cooling LED will be bright. If press this button again, cooling function will stop; the water pump stops running
and cooling LED will go out.
Timer/preset button:
Timer off function: In running status, press this button to select the time of timer off. If repressing this button
successively, you can select the time circularly in the sequence of 1 hr > 2hrs > 3hrs > ... > 15hrs. Preset on func-
tion: In standby status, press this button to select preset on time. If repressing this button successively, the
preset on time can be selected circularly in the sequence of 1hr > 2hrs > 3hrs > ... > 15hrs. When the preset time
is reached, the preset LED will go out and the fan will be turned on automatically. The default preset worKing
status is low general wind with 2hrs timer off and right & left swing. Other functions are not available.
Water-lacking protection:
When the water tank is lacking water, the water pump will stop pumping, the buzzer will give out 3 sounds to
warn and the water-lacking LED or the cooling LED will blink. In the cooling mode, when there's water-lacking
protection, the fan speed motor won't be affected; While in the auto humidifying mode, the main motor will
stop running if there is water-lacking protection. (This function is available only in cooling mode or auto humi-
difying mode.)
10