Cleaning and maintenance
Always unplug the unit from the power supply. Do not use any
solvents in cleaning.
Technical data P10 (MP 100 E)
Protection class/type:
Mains voltage:
Power input:
Acoustic pressure:
Output:
Max. supply temperature:
Subject to technical modifications.
Circuit diagram (C)
The voltage and frequency of
the power supply must match the
ventilator's specifications.
A double pole isolating switch from
the mains with a contact gap of at least 3 mm is stipulated where the
ventilator is installed. Installation in humid rooms must be effected in
accordance with DIN/VDE 0100 T 701.
/ IP 24
230 V
15 W
20 dB(A) 3 m
100 m³/h
40 °C
Ø 99 mm
50 Hz
~
14 mm
7