Klauke HK 5/22 Bedienungsanleitung Seite 31

Instruction manual HK 5/22
___________________________________________________________________________
5.2. Explanation of the application range
Our hydraulic crimping tool type HK 5/22 has a large number of various dies (Pos.-no. 7)
available to crimp primarily copper and aluminium but also other connecting material.
Table 2
Crimping range
___________________________________________________________________________
a 6-300
_____________________________________________________________________
b 6-240
___________________________________________________________________________
c 10-240
___________________________________________________________________________
d 25-185
___________________________________________________________________________
e 25-4 to
120-20
___________________________________________________________________________
Instruction manual HK 5/22
___________________________________________________________________________
5.2. Explanation of the application range
Our hydraulic crimping tool type HK 5/22 has a large number of various dies (Pos.-no. 7)
available to crimp primarily copper and aluminium but also other connecting material.
Table 2
Crimping range
___________________________________________________________________________
a 6-300
_____________________________________________________________________
b 6-240
___________________________________________________________________________
c 10-240
___________________________________________________________________________
d 25-185
___________________________________________________________________________
e 25-4 to
120-20
___________________________________________________________________________
Connecting material
mm² Tubular cable lugs and connectors „Standard type"
mm² Compression cable lugs and joints DIN 46235/DIN 46267
mm² Aluminium cable lugs and connectors
mm² Compression joints for full-tension connections for Aldrey
conductors acc. to DIN 48201, sheet 6 and Al-conductors acc. to
DIN 48201, sheet 5, 120-185 mm²
mm² Compression joints acc. to DIN 48085, part 3 for
AL/steel conductors acc. to DIN 48204.
Connecting material
mm² Tubular cable lugs and connectors „Standard type"
mm² Compression cable lugs and joints DIN 46235/DIN 46267
mm² Aluminium cable lugs and connectors
mm² Compression joints for full-tension connections for Aldrey
conductors acc. to DIN 48201, sheet 6 and Al-conductors acc. to
DIN 48201, sheet 5, 120-185 mm²
mm² Compression joints acc. to DIN 48085, part 3 for
AL/steel conductors acc. to DIN 48204.
page 31
page 31