Klarfit Ellifit Supreme Bedienungsanleitung Seite 21

● Attach the flywheel rod (7R / L) to the pedal rods (6R / L) and fasten them with screws (J), washers
(L) and nuts (M).
● Press the round caps (19 and 25) into the openings provided.
● Attach the flywheel rod (7R) to the long end of the handle holder (4) with screws (J) and washers (L).
● Attach the rod joint (5) to the crank (59) with the screw (26R), spring washer (28), washer (44)
and nut (29R).
● Press the round caps (18 and 30) into the openings provided.
● Attach the flywheel rod on the other side in the same manner.
● Caution: The screws for the levers are marked with L and R for left and right.
21
Construction - Step 3
Construction - Step 4