Busch-Jaeger 1080U Betriebsanleitung Seite 38

Programming
• set the starting time of the 1st high-temperature period
via the +/- pushbuttons
- the starting time of the 1st high-temperature period,
e.g., 7:00 hrs., will be displayed.
• Press pushbutton C again
- the symbol A and the working day will be displayed.
• set the starting time of the 1st low-temperature period
via the +/- pushbuttons
- the starting time of the new 1st low-temperature
period, e.g., 21:00 hrs., will be displayed.
• Press pushbutton C again, • make no further entries
- after 3 minutes have elapsed, the thermostat will
operate according to the new settings.
To activate the settings ex Works
The simplest way to restore the above settings ex Works
is as follows:
• Simultaneously press pushbutton "C" and the +/-
pushbutton (see Fig. 3).
• Then update the time and the day of the week (see
chapter "Start-up").
GB