Busch-Jaeger 1080U Betriebsanleitung Seite 36

Programming
If you wish to have different values (s. also chapter "Start-
up"), thermostats 1080 U/1080 UF are programmed in the
following order (settings ex Works are shown in brackets):
- Low temperature
on working days
- Starting time of 1st high-temperature period (06:00)
- Starting time of 1st low-temperature period (22:00)
- Starting time of 2nd high-temperature period (00:00)
- Starting time of 2nd low-temperature period (00:00)
on non-working days
- Starting time of 1st high-temperature period (06:00)
- Starting time of 1st low-temperature period (22:00)
- Starting time of 2nd high-temperature period (00:00)
- Starting time of 2nd low-temperature period (00:00)
The following steps must be followed in order to program
each individual setting:
• Press pushbutton C and
• set the new values via the +/- pushbuttons
- the values/indications in the display will be updated.
• Press pushbutton C to terminate programming.
GB
(15°C)