Waeco CoolAir RT880 Bedienungsanleitung Seite 38

Using the parking cooler
7.5 Extracting condensation (SP950 with SP950T roof
evaporator unit only)
The condensated water which accumulates due to the way the system works
is automatically extracted at intervals during operation.
You can pump out the condensated water manually when necessary:
➤ Switch off the system.
➤ Press and hold the Operating mode (fig. 2 4, page 4) and – (fig. 2 7,
page 4) buttons simultaneously.
➤ In addition, press the ON/OFF button (fig. 2 1, page 4) briefly.
✓ The firmware version appears in the digital display for 5 seconds.
✓
then appears in the digital display and the system starts the
000
extraction process for 15 seconds.
You can now let go of the Operating mode (fig. 2 4, page 4) and –
(fig. 2 7, page 4) buttons.
✓ The compressor and the fan do not switch on.
✓ The system switches off automatically.
I
NOTE
To stop the extraction early press the ON/OFF button until the
pump switches off.
If you want to tilt the driver's cab, you first need to drain the condensation
manually.
➤ Keep repeating this procedure until the pump starts making a clearly audi-
ble, loud noise while draining.
✓ There is then no more condensation left in the system.
➤ Press the ON/OFF button until the pump switches off.
A
NOTICE!
Avoid prolonged dry periods as this can damage the pump
(indicated by loud noise while draining).
38
RT880/SP950
EN