VOLTCRAFT DET-3T Bedienungsanleitung Seite 3

OPERATING INSTRUCTIONS
G
FOLDING THERMOMETER WITH TIMER "DET-3T"
ITEM NO. 109982
INTENDED USE
The product is used to measure the temperature of liquid or solid foods, for example, when
baking or frying. Thus a puncture probe (with heat-resistant probe wiring) is made available
that makes the measuring of the temperature right in the interior of foodstuff possible.
Also built-in are a temperature alarm and a countdown timer.
Operation requires two batteries of the type AAA/Micro.
Always observe the safety instructions and all other information included in these operating
instructions. Keep the operating instructions. If you pass the device on to a third party, please
pass on these operating instructions as well.
Any use other than as described above is not permitted and can damage the product. In addi-
tion, it can lead to hazards such as short-circuiting, fire, etc.
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
PACKAGE CONTENTS
• Thermometer
• Puncture probe with wire
• 1x battery AAA/Micro
• Operating instructions
EXPLANATION OF SYMBOLS
An exclamation mark in a triangle points to important instructions in this operating
manual which absolutely have to be observed.
The "arrow" symbol is used where special tips and notes on operation are provided.
SAFETY INSTRUCTIONS
Please read all instructions before using this device, they include important
information on its correct operation.
Damage due to not following these operating instructions will void the war-
ranty! We do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void.
• The unauthorised conversion and/or modification of the product is not permitted
for safety and approval reasons (CE). Never dismantle the product, except for
inserting/replacing the batteries as described in this operating manual.
• The product is not a toy and does not belong in the hands of children.
• The manufacturer does not accept any liability for incorrect or inaccurate readings
or any consequences resulting from such readings.
• Placing the whole thermometer, e.g. in a baking oven, is not permitted. There is
risk of fire and explosion; danger to life from poisonous vapours.
Only the puncture probe and the heat-resistant probe wiring may be inserted in
the oven; never the thermometer as a whole.
• Handle the product with care, it can be damaged by impacts, blows, or accidental
falls, even from a low height.
Protect the probe wire from sharp edges. Do not bend or pinch the puncture
probe.
If you see any damage, do not use the product any longer. and take it to a spe-
cialised workshop or dispose of it in an environmentally friendly manner.
• In schools, educational centres, hobby and self-help workshops, the operation of
the product is to be supervised by trained employees.
• Do not leave packaging material carelessly lying around. It may become a dan-
gerous plaything for children!
• If you are not sure about the correct operation or if questions arise which are not
covered by the operating instructions, please do not hesitate to contact our techni-
cal support or another specialist.
VERSION 02/15
NOTES ON BATTERIES AND RECHARGEABLE BATTERIES
• Batteries/rechargeable batteries must be kept out of the reach of children.
• Do not leave batteries/rechargeable batteries lying around; there is a risk that they could be
swallowed by children or pets. If they are swallowed, consult a doctor immediately.
• Leaking or damaged normal/rechargeable batteries can cause acid burns upon skin con-
tact; therefore, use suitable safety gloves.
• Liquids leaking from batteries/rechargeable batteries are very chemically aggressive.
Objects or surfaces coming into contact with these liquids might be considerably damaged.
Thus, store batteries/rechargeable batteries in a suitable location.
• Ensure that the batteries are never short-circuited, taken apart or thrown into a fire. There is
a risk of explosion!
• Do not recharge normal, non-rechargeable batteries. There is a risk of explosion! Charge
only rechargeable batteries that are intended for this purpose; use a suitable battery
charger.
• Make sure that the polarity is correct when inserting the batteries or rechargeable batteries
(pay attention to the negative and positive terminals).
• If the device is not to be used for a long time (e.g., storage) remove the inserted batteries/
rechargeable battery. Old batteries/rechargeable batteries can leak and cause damages on
the product; loss of guarantee/warranty!
• For the environmentally friendly disposal of batteries and rechargeable batteries, please
read the chapter "Disposal".
It is possible to operate the product with a rechargeable battery. However, the operating
time and the display contrast are greatly reduced due to the lower voltage (battery =
1.5 V, rechargeable battery = 1.2 V).
Therefore, instead of using rechargeable batteries, we recommend operating the
product with high-quality alkaline batteries to ensure long and reliable operation.
CONTROLS AND DISPLAY
1
2
3
4
5
6
7
1 Timer (hours : minutes: seconds)
2 factual measured temperature over puncture probe
3 Connection socket for the puncture probe
4 "HR" button (to set the timer hour)
5 "MIN" button (to set the timer minutes)
6 "UP" button (to increase temperature values for the temperature alarm)
7 "DOWN" button (to decrease temperature values for the temperature alarm)
8 Display of the current temperature value for the temperature alarm
9 Slide Switch "TEMP ALERT ON / OFF" (to switch the temperature alarm on/off)
10 "START/STOP" button (to stop/start the timing)
11 Magnet
12 Battery compartment
13 Magnet
14 Sliding switch to toggle temperature units °C or °F
8
9
10
°F °C
11
12
13
14