Before Using For The First Time; Use - Bosch MMBM4 Serie Gebrauchsanleitung

Before using for the
first time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
■ Remove the base unit and all accesso-
ries from the packaging.
■ Remove the packaging material that is
present.
■ Check that all the parts are present and
examine them for obvious damage.
X Fig. A
■ Thoroughly clean and dry all parts
before using for the first time. X "Care
and daily cleaning" see page 14

Use

W Risk of injury!
– Do not insert the mains plug until all
preparations for working with the appli-
ance are complete and the required
attachments are assembled correctly
and connected to the base unit.
– Never process food that is hotter than
50°C in the plastic blender jug.
– Handle the blade insert with care, and
don't put your hand between the blades.
X Fig. B
– Never put your hand in the blender jug
once it is in place, and always put the lid
on before using the appliance.
W Risk of scalding!
Pour no more than 0.3 litres of hot or froth-
ing liquid into the glass blender jug.
■ Place the base unit on a stable and level
work surface.
■ Completely unwind the mains cable.
Before using for the first time
Using the to-go or chopper
blender jug
X Fig. C
1. Put the desired ingredients into the
blender jug.
2. Hold the blade insert by the plastic
ring and insert it – blade first – into
the blender jug. Turn the blade insert
anticlockwise until it audibly clicks
into place.
3. Turn the blender jug over.
4. Insert the blender jug into its recess on
the motor block and turn it clockwise
until it audibly clicks into place.
5. Plug the mains plug into the mains.
6. Hold the blender jug firmly with one
hand. Hold down the t or u button until
the mixture has reached the desired
consistency.
7. Release the button and wait until the
appliance comes to rest. Disconnect the
mains plug.
8. Turn the blender jug anti-clockwise and
then remove it.
9. Turn the blender jug over.
10. Turn the blade insert clockwise and then
remove it.
Caution!
Never set the blade insert down with the
blade underneath. This could damage
the blade and scratch your work surface.
X Fig. B
11. Close the jug with the lid.
12. To pour out or drink contents, undo screw
cap and remove, or lift up drinking cap.
Clean all the parts. X "Care and daily
cleaning" see page 14
en
13