buttons and display. will attack the material used
for the housing, buttons and display.
In case of an extended period without use, remove
the batteries from the device. If a battery has
leaked, the battery compartment is to be thoroughly
cleaned with a cloth slightly moistened with wash-
ing up liquid, dried with a dry cloth and only then
a new battery is to be inserted.
7. Technical data
Electric field
Measuring range: ........................... Resolution:
0–200 V/m ...........................................100 mV/m
0–2 kV/m ....................................................1 V/m
Frequency range: ........................ 50 Hz–80 kHz*
Magnetic field:
Measuring range: ........................... Resolution:
0–2 µT .......................................................... 1 nT
0–20 µT ...................................................... 10 nT
0–200 µT .................................................. 100 nT
Frequency range: ........................ 15 Hz–15 kHz*
Display: ..................LCD, 3.5 digit, with bar graph
Filter: Low: low pass 500 Hz; High: high pass 500Hz
Power supply: .....................................9V battery
Battery life: ...approx. 3 hours (of continuous use)
* Lower and higher values are measured, however these can only be
evaluated qualitatively.
31