Miscellaneous Functions; Hold And Peak Function - elv E/H-FeldMessgerät EH 100 Bedienungsanleitung

HI - Fields in the frequency range above 500 Hz
are measured, e.g. emissions from computers
and monitors.
Lo - Fields in the frequency range below 500 Hz
are measured, e.g. 50 Hz AC fields from the
mains electricity supply.
Lin - Fields over the entire nominal frequency range
of the device are measured.

5.3. Miscellaneous functions

5.3.1. HOLD and PEAK function

By pressing the "HOLD/PEAK" button once or
twice, you can save on the display either the current
measured value or the peak value measured, e.g.,
so that you can make a note of the value later.
The mode set—PEAK or HOLD—is indicated in the
bottom line on the display.
HOLD
By briefly pressing the "HOLD/PEAK" button twice,
you can select the HOLD mode. In this mode the
current measured value is saved on the display.
By pressing the "HOLD/PEAK" button again, you
can return to the normal mode.
28