Intended Use - Westfalia BX-1 Bedienungsanleitung

Before first Use
Unpack the battery charger and check all parts for any damage in
transit. Dispose of packaging materials or store it out of reach of
children. Plastic bags etc. may become a deadly toy for children.
Please read the manual completely before operating the unit.

Intended Use

The battery charger is intended to charge 12 V sealed lead acid
batteries, used in cars, motorbikes and other vehicles.
With this charger it is possible to charge these various batteries at
different ambient temperature also in cold conditions to almost
100% of their original capacity.
The charger is a 5-step fully automatic switch mode unit which
adjusts itself to charging current and voltage requirement to charge
and maintain the battery. The charger is able to recover slightly
sulphated batteries, to diagnose and rescue drained battery and to
provide trickle charge and maintenance charge, which increases
battery life.
The below mentioned battery types with a battery capacity of
12 V /1.2 Ah – 120 Ah are suitable to be charged with this charger:
SLA (Sealed Lead Acid)
WET (Liquid Electrolyte)
GEL (Gelatine Type Electrolyte, absorbed into the plates)
AGM (Absorbed Glass Mat)
MF (Maintenance Free)
With the quick connection (7) you can use pole
connection cables with ring terminals.
For using ring terminals, pull out the quick connection
and connect it again with the pole connection cables
with ring terminals.
Intended Use
21