Adjusting Angle Of Cutter Bar - Stihl HLA 65 Gebrauchsanleitung

12 Operating the Hedge Trimmer
► Hold the hedge trimmer firmly with one hand on the control
handle - wrap your thumb around the handle.
► Hold the trimmer with the other hand on the loop handle -
wrap your thumb around the loop handle.
HLA 85
2
► Connect the carrying ring (2) to the carabiner (1).
0458-765-9921-C
► Hold the hedge trimmer firmly with one hand on the control
► Hold the hedge trimmer firmly with your other hand on the

12.2 Adjusting Angle of Cutter Bar

The angle of the cutter bar can be adjusted to 2 different
positions upwards and 3 different positions downwards to
suit the application and the height and reach of the user.
1
► Switch off the hedge trimmer, push retaining latch to
► Pull back the sliding sleeve (1) and hold it there.
► Grip the swivel handle (2) and swing cutter bar to required
► Release the sliding sleeve (1).
handle - wrap your thumb around the handle.
handle hose - wrap your thumb around the loop handle.
position and remove the battery.
1
2
70°
angle.
English
45°
47