Evaporating Residual Water - K-FEE square Betriebsanleitung

Evaporating residual water

INFO
If you leave the appliance
unused for longer periods,
germs which present a health hazard
can form in the residual water. If there
is a danger that the appliance is sub-
jected to frost, frozen residual water
can damage functionalities. In both
cases you should empty the appliance
by steaming out the residual water.
WARNING
When steaming out, hot
steam (up to 120°C) and hot
water are produced - scalding hazard.
Never reach under the spout, and re-
main a safe distance away from the
spout. The collecting container under
the spout contains extremely hot water
- please handle carefully.
Wait until the appliance switches
1
itself off automatically. After this, open
and close the lever so that you eject any
capsule which might have been inserted.
1
26
(periods of absence/frost protection)
Empty the water tank, replace it in
2
the appliance empty and put a collecting
container which is suitable for very hot
water under the spout.
Now press the "Small cup" button and
3
the "Large cup" buttons simultaneously,
and keep the buttons pressed for at least
3 seconds. Now release all the buttons
again. The appliance will now steam all the
residual water out. The appliance will
switch itself off automatically after stea-
ming.
3
WARNING Very hot water –
scalding hazard.
Now carefully empty the collecting
4
container with the hot water.
min.
3 sec.