K-FEE square Betriebsanleitung Seite 49

4
NOTE Your programmed cup
fi lling capacity may not be
less than the necessary quan-
tities for steps 4 and 5.
WARNING Very hot water –
scalding hazard.
Now leave the cleaning agent 2 minu-
5
tes to activate. Start the cleaning process
by pressing the "Large cup" button (mi-
nimum quantity 100 - 200 ml). The clea-
ning fl uid may turn slightly green during
the cleaning process.
5
PROHIBITED
Do not drink the cleaning
fl uid – health hazard.
Open the lever, activate capsule
6
ejection, close the lever and empty the
collecting container. Replace the empty
collecting container under the spout
again.
6
Now press the "Large cup" button
7
again to rinse the appliance out with fresh
water (do not insert a capsule!). Repeat
this process until the water dispensing
from the spout is clear.
7
To complete, remove the collecting
8
container and the water tank, empty
them and clean in hot water. Then fi ll the
water tank with fresh water and replace it
in the appliance with the drip tray.
21