Recorder; Timer Recording - Xoro HRT 8300 Bedienungsanleitung

Timer Recording

There are two ways of programming a recording with Timer.
1. Choose the program to be recorded in EPG and press
the GREEN button (see page 18).´Program, date, and
time will be taken over from the EPG.
2. Press the button TIMER. Select an empty Timer
(„Out") and press the OK button.
After all parameters on the Timer have been set, move the
cursor with ▲/▼ to the field „save" and confirm with OK.
Example:
Once, Record, RTL HH SH, 03.11.2011, 14:00 to 15:00
Timer Mode:
Timer Service:
Wakeup Channel:
Wakeup Date:
Wakeup Tim:
Duration:
Notes:
To delete a Timer, set the Timer Mode to be „Out" and move the cursor to the field „Save" and
confirm with OK. The timer is deleted.
Settings
Timer Mode
Timer Service
Wakeup Channel
Wakeup Date
Wakeup Time
Duration

Recorder

Once
Record
RTL HH SH
03/11/2011
14:00
01:00
Explanation
Once: implement the timer once
Daily: implement the timer everyday
Mo-Fr: implement the timer on week days (Mo.-Fr.)
Weekly: implement the timer every week
Record: recording program on USB storage
Channel: switch on the receiver at the given time
Select the program to be recorded. You can display the channel list with the
OK button.
Choose the date of Timer Implementation (TT/MM/JJJJ)
Set the time of start
Set the duration of recording
HRT 8300
ENG 19