Recorder - Xoro HRT 7520 Bedienungsanleitung

Recorder

Timer
Select a programme on the EPG menu and press
the OK button. This programme will be taken over
in the Timer programming.
It is advisable to set the starting and stopping
time of recording some minutes before/after the
broadcast because they never begin in time.
Other options are Repeat and Mode. Repeat
defines if the broadcast is recorded once or
continuous. Mode has to be set to Record if you
want to record a broadcast.
The programmed broadcast show up in the Timer program
list.
Note:
Recordings assume connected USB media!
Recording
If you want to record the current TV programme, please connect a USB storage to the USB port.
After the storage is recognized by the device, press the REC button on the remote control.
You can define duration of the recording by pressing the REC button repeatedly. The duration will be
shown on the screen.
The recording starts immediately. To abort the recording, please press the button and confirm
the security query with the OK button.
To abort the recording, please press the button and confirm the security query with the OK button.
Program a record schedule
You can also program the record schedule from
the Live picture. Please press the BLUE button
on the remote control and the Timer
programming appears on the screen.
Press the RED button to add a schedule and
modify the options (see picture above).
18