Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Connecting USB storage
The USB port is on the front side of the receiver. It takes the receiver under circumstances some
time to recognize the USB showing the message "USB disk A is connected".
Following USB devices will be supported:
USB storage (USB sticks etc.)
Max. capacity 320 GB
File system: FAT 16, FAT32, NTFS
Notes:
USB Storage up to 320GB will be supported. USB storage of
larger capacity could also be used. However the compatibility of
these USB storages with the receiver could not be guaranteed.
There are a variety of USB storages on the market. Not all of
them conform the specification of USB storage. If your USB storage could not be read by
the receiver, please try another USB storage.
If a USB device could not be read any more, please carry out a data storage medium
analysis with your computer or format the storage again.
USB storages requiring higher electric current than 500mA (0,5A) do not conform the
specification of USB storage. These USB storages could possibly not work smoothly
together with the receiver.
Please always save all data on the USB before connection to the receiver.
A sufficient writing and reading speed of the USB storage is necessary for recording HD
programs or use the Time-Shift function. In case of problems in recording or Time-Shift,
please try a USB storage with higher writing– and reading speed.
ENG 14
Connection
HRT 8300

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis