Hi-Fi System - Xoro HRT 8300 Bedienungsanleitung

Anschluss an die HI-FI Anlage
The receiver has both analogue and digital audio output. An audio cinch cable is nessary for the
analogue connection to a Hi-Fi system. This cable is not included in the accessories. Connect the
AURIO R L out put with a free audio input of your Hi-Fi system. Please note, this receiver should
not be connected with a PHONO Input. Please read the manual of your Hi-Fi system to activate the
audio input.
If you connect the receiver with your TV via YPbPr or CVBS, please connect the AUDIO R L of the
receiver with separate cables to the audio input of your TV. Otherwise there will be no sound.
A coaxial cable is necessary for the S/PDIF signals of the digital connection to a Hi-Fi system. This
cable is not included in the accessories.
PDIF input of your Hi– Fi system. Please refer to the manual of the Hi-Fi system to select the audio
input.
Notes:
The receiver could out put digital signals in PCM-(stereo) or RAW-/Bitstream (Dolby Digital). If your
Hi-Fi system provides no sound for programs with Dolby Digital sound track, please refer to page 33
to change the format of the S/P DIF out put.
It is not possible for the receiver to output the format "dts".
Connection
Connect the S/PDIF out put of the receiver with the S/
HRT 8300
ENG 13