OPERATING INSTRUCTIONS
Initial Checks
Before proceeding with the start-up of the
machine, we suggest to check the following:
- The wash tank filters are clean and properly
positioned.
- The wash arms are fastened at the right place
and rotate freely.
- The end of the rinse aid tube is placed inside
the appropriate chemical container containing
adequate chemical supply.
- Wash performance can be effected by various
environmental variables
- Incoming water temperature can affect the
wash cycle duration as the machine need more
or less time to heat the water to the required
temperature.
Control Panel
Please familiarise yourself with the controls of your machine prior to switching on the power.
ECO 500
1 2 3 4 5
1: Control Panel
2: On / Off
3-4-6 Indicator Lamps
5: Cycle Start
- Water hardness is a problem in some areas.
In areas of hard water supply we recommend
that a water softener is connected. Problems
caused by excessive water hardness may
not be covered by your warranty.
- To achieve best performance it is recommen-
ded that large food scraps be removed prior
to loading the machine.
- Ensure that the incoming water pressure
is within 2-4 bar. If the pressure exceeds 4 bar
we recommend that the pressure reducing
valve supplied is fitted to the inlet hose / sole-
noid.
6
18