Installation - EuroLite LED IP Ribbon RGBand Controller forLED IP Ribbon RGB Bedienungsanleitung

If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.

INSTALLATION

In order to design the desired patterns, draw the form onto the surface or wrap the LED IP Ribbon RGB
around the desired form and attach the LED IP Ribbon RGB with adhesive tape or a few drops of glue.
Connect the cables of the LED IP Ribbon RGB to the LED IP Ribbon RGB Controller. The cable color
determines the LED color; the black cable is the common "+".
Up to 15m 24V LED IP Ribbon RGB can be controlled with a single controller.
Up to 20m 12V LED IP Ribbon RGB can be controlled with a single controller.
Connect the LED IP Ribbon RGB Controller to the transformer. Connect the transformer to the mains (see
graphic). Make sure that the outlet is in a dry area.
www.eurolite.de
10/12 00058899.DOC Version 1.0