Battery Replacement - PeakTech 1630 Bedienungsanleitung

6. Battery replacement

Use the following procedure to replace the battery:
1. Turn the instrument power off.
2. Place the instrument face-down and remove the screw of battery
compartment.
3. Remove the battery cover and remove the batteries.
4. Install new batteries and refit battery cover.
All rights, also for translation, reprinting and copy of this manual or
parts are reserved. Reproductions of all kinds (photocopy, microfilm or
other) only by written permission of the publisher.
This manual is according the latest technical knowing. Technical
changings which are in the interest of progress, reserved.
We herewith confirm that the units are calibrated by the factory
according to the specifications as per the technical specifications.
We recommend to calibrate the unit again, after 1 year.
®
© PeakTech 05/2005
-25-