Herunterladen Inhalt Inhalt Diese Seite drucken

Replacing The Battery - PeakTech 1655 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6. 8. Temperature measurements
Warning!
To avoid electric shock, disconnect both test probes from any source of voltage before making a
temperature measurement.
1. Set the rotary switch to TEMP position.
2. Insert the temperature-adaptor in the V/Ω-Buchse (+) and the COM-socket (-) respective to the
polarity-markings on the temperature-adaptor.
3. Select the desired measuring unit ° C or ° F by pressing MODE-button.
4. Insert the K-type thermocouple into the temperature socket, making sure to observe the correct
polarity.
5. Touch the temperature probe head to the part whose temperature you wish to measure.
Read the temperature in the display.

7. Replacing the battery

WARNING! To avoid electrical shock, disconnect the test leads and any input signals before
replacing the battery. Replace only with same type of battery.
This meter is powered by a NEDA type 1604 or equivalent 9 V-battery. When the meter displays
the battery symbol the battery must be replaced to maintain proper operation. Use the following
procedure to replacing the battery.
1. Disconnect test leads from any live source, turn the rotary switch to OFF and remove the test
leads from the input terminals.
2. The battery cover is secured to the bottom case by a screw. Using a screwdriver, remove the
screw from the battery cover and remove the battery cover.
3. Remove the battery and replace with a new equivalent 9 V-battery.
4. Replace the battery cover and reinstall the screw.
Note:
Batteries which are used up, dispose duly. Used up batteries are hazardous and must be given in
the for this being supposed collective container.
7.1. Statutory Notification about the Battery Regulations
The delivery of many devices includes batteries, which for example serve to operate the remote
control. There also could be batteries or accumulators built into the device itself. In connection with
the sale of these batteries or accumulators, we are obliged under the Battery Regulations to notify
our customers of the following:
-34-

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis