Waldorf X-Pole Dual Filter Bedienungsanleitung Seite 47

62 reserved #6 (fixed 0)
63 reserved #7 (fixed 0)
64 input gain
65
66 input attenuation
67
68 ACM
69
70 channel link
71 trigger source
72 checksum
checksum is computed with a 8-bit accumulator, result is masked as 7 bits value and
this is used for the checksum value
2.1 preset bulk dump
---------------------
The bulk dump of all presets is done preset by preset. Each preset is dumped as a
separate preset dump. After the preset bulk dump a global parameter dump is performed.
2.2 Global parameter dump
-------------------------
In a global parameter dump the global parameters of the Xpole are contained. The format
of this dump is:
.... data .... =
offset description
0 input gain
1
2 input attenuation
3
4 ACM source
5 gain
6 channel link
7 trigger source
8
9 MIDI channel
10
11 load gain ON/OFF (0=off)
12 accept program changes (0=no)
13 start-up program
14 checksum
2.3 Requests
-------------
These messages are received by the Xpole and the Xpole will return with the requested
function.
Bedienhandbuch X-Pole
CH1
CH2
CH1
CH2
source
gain
CH1
CH2
CH1
CH2
CH1
CH2
CH1
CH2
47