Electrolux EHXP8H10KK Benutzerinformation Seite 12

12 www.electrolux.com
Deactivating the function
To deactivate the function repeat the
procedure or touch
on the control panel disappears.
If two operating zones are
detected or a large
cookware is used the
function deactivates.
4.14 Timers
There are 3 timers: CountUp Timer,
Count Down Timer and Reminder.
Pro Cook. When the function
operates you can use only
Reminder.
CountUp Timer
You can use this timer to monitor how
long the cooking zone operates. The
function starts automatically and comes
on next to the cooking zone symbol in
cooking zone panel. To check the time
touch the zone symbol.
To reset the time: enter the cooking
zone panel. Touch
cooking zone symbol and choose correct
option from the list. To reset the time you
can also touch
zone symbol.
Count Down Timer
You can use this timer to set how long
the cooking zone should operate for a
single cooking session.
To activate the function: enter the
cooking zone panel. Touch
the cooking zone symbol and choose
setting the cooking time. Set the time by
scrolling separately hours and minutes.
. The dashed area
next to the
next to the cooking
next to
02 55
01 50
00 h 45 min OK
24 40
23 35
Than confirm your selection. You can
also choose to cancel your selection.
When the time comes to an end, the
sound operates and the cooking zone
deactivates. To set the time you can also
touch .
To stop the sound: touch the display.
Reminder
The function has no effect on operation
of the cooking zones. You can use it to
also when the hob is deactivated.
You can add the shortcut to
the function to the status bar
on the control panel
To activate the function: touch
choose the function from the list. Set the
time and confirm your selection. To
activate the function you can also touch
shortcut symbol on the status bar
When the time you set comes to an end
a sound operates.
To stop the sound: touch the display.
4.15 PAUSE
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting. The function
has no effect on timers operation.
You can add the shortcut to
the function to the status bar
on the control panel
To activate the function: touch
choose the function from the list. To
activate the function you can also touch
shortcut symbol on the status bar
To deactivate the function: touch the
display. Previous heat settings are
restored.
4.16 Locking the hob
The hob has 3 lock functions: Lock Now,
Screen Lock and Child Lock.
.
and
.
.
and
.