Electrolux EHXP8H10KK Benutzerinformation Seite 17

Problem
Power Boost is not activat‐
ing for the pot on the flexi‐
ble zone.
Heat settings for the pots
on flexible zone are re‐
duced.
comes on.
Pro Cook function deacti‐
vates.
The display brightness is
reduced.
The display does not react
to the touch.
The power level is re‐
duced. The arrow pointing
down comes on in the
cooking zone symbol.
The backlight is on, but the
contrast of the display is
bad.
There is no signal when
you touch the panel sensor
fields.
Possible cause
The diameter of the bottom
of the cookware is too
small for the zone.
There is already cookware
on the zone.
The pot is bigger than 240
mm. The maximum power
is reached.
You are using to many
pots with the highest heat
setting on the flexible
zone. Power management
function is activated.
One of the Lock functions
is active.
You are using more than
one pot.
The temperature of the
zones is high. To ensure
long lifetime of the display
the brightness is reduced
depending on the tempera‐
ture of the hob.
Part of the display is cov‐
ered or the pots are placed
to near to the display.
Power management func‐
tion operates.
The hot cookware is on the
display.
The signals are deactiva‐
ted.
ENGLISH
Remedy
Use cookware with correct
dimensions.
Refer to "Technical infor‐
mation" chapter.
Move the first pot slightly to
make room for the next
one.
It is normal for this size of
pot. Use smaller pot or use
the highest heat setting for
the big one.
Move some pots to induc‐
tion cooking zones.
To unlock the hob touch
letters in alphabetical order
A - O - X.
Use only one pot for the
function.
Let the hob cool down.
Remove the objects. Move
the pots away from the dis‐
play.
Refer to "Daily use" chap‐
ter.
Remove the object and let
the hob become sufficient‐
ly cool. If the contrast is not
clear, speak to an Author‐
ised Service Centre.
Activate the signals.
Refer to "Daily use" chap‐
ter.
17