Power Management; Power Function - Electrolux EHD60020X Benutzerinformation

diagram), and then decreases to the neces-
sary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1. Touch
. The symbol
in the display.
2. Immediately touch
comes on in the display.
3. Immediately touch
until the necessary heat setting comes
on. After 3 seconds
display.
To stop the function, touch
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3

POWER FUNCTION

The Power function makes more power
available to the induction cooking zones.
The Power function can be activated for a
limited period of time ( see Technical Infor-
mation chapter). After that, the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch
comes on. To deactivate, touch
.
POWER FUNCTION
The Power function makes more power
available to the induction cooking zones.
The Power function can be activated for a
limited period of time ( see Technical Infor-
mation chapter). After that, the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch
comes on
. The symbol
again and again
comes on in the
.
4 5 6 7 8
comes on. To deactivate, change the
heat setting.

POWER MANAGEMENT

The power management divides the power
between cooking zones (see the illustra-
tion). The power function increases the last
selected power to the maximum level for
one cooking zone. The power in other
cooking zones automatically decreases.
The heat setting display for the reduced
zone changes between two levels.
TIMER
Count Down Timer
Use the Count Down Timer to set how long
9
the cooking zone operates for only this one
time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate or change the Timer:
, touch
00 99
( -
or
of the cooking zone starts to flash slow,
the time counts down.
• To deactivate the Timer: set the cook-
ing zone with
vate the Timer. The remaining time
counts back to
cooking zone goes out.
• To see the remaining time: set the
cooking zone with
,
the cooking zone starts to flash quickly.
The display shows the remaining time.
or of the timer to set the time
minutes). When the indicator
and touch
00
. The indicator of the
. The indicator of
electrolux 21
to deacti-