Design and function
vent hole. Keep the connection which is not used open and protect it from pollution.
5.2
Function
5.2.1 FC-mode / Fail-safe-to-close
5.2.2 FO-mode / Fail-safe-to-open
5.2.3 DA-mode / Double acting
32
Instruction manual
3/2 way solenoid valves are used to
control single acting actuators (FC).
They are mounted either directly to
the actuator via a banjo bolt or via a
battery mounting plate or valve
cluster, as required.
3/2-way solenoid valves are used to
control single acting actuators (FO).
They are mounted either directly to
the actuator via a banjo bolt or via a
battery mounting plate or valve
cluster, as required.
4/2 way solenoid valves are used to
control double acting actuators (DA).
They are mounted either directly to
the actuator via a Namur connector
plate or via valve clusters.