Maintenance
Risk of injury and missing product quality through loaded springs (FO Versions)
Please open housing carefully.
Assemble new diaphragm in the same position as the old diaphragm:
-
Position actuator upright for the first turns thus the diaphragm holder, may take
the set screw of the Diaphragm
-
Screw new diaphragm clockwise into the piston thread
-
Turn the diaphragm back by min 90° /max 360°
-
Re-align the bulge of the diaphragm parallel to compression piece. Diaphragm
tabs be positioned between the narrow guiding bars of the inner housing.
40
Instruction manual