Transport And Storage; Design And Function; Design - GF 604 Bedienungsanleitung

Instruction manual
4

Transport and storage

The product has to be treated, transported and stocked carefully.
Follow the instructions below:
Protect the product against external force during transport (impact, stroke, vibrations).
Transport and/or store product in its original packaging.
Make sure that the product cannot be damaged neither by mechanical nor by chemical
impacts.
Check the product prior to assembly on transport damages.
Protect the product from dust, dirt, moisture as well as heat and ultraviolet radiation.
Especially the connections have to be protected against mechanical and chemical impacts.
5

Design and function

5.1

Design

L L egend
Pos. Name
1 Position Indicator
2 Piston
3a Air connection for FO control mode
3b Air connection for FC control mode
3a+3b Air connections for DA control mode
4 Housing with plastic- plastic
connection
The valve configuration of the DA control mode is not using a spring (Pos. 9 or Pos. 10)
NOTICE
Do not apply more than 2 2 Nm on the plastic thread while connecting the pressured air at the
control air connection. Do n n ot use conical threads!
For types with function FC or FO, the control air connection which is not used contains the
Pos. Name
5 Compressor
6 Diaphragm
7 Valve body
8 Index Plate for identification
9 Pre –loaded Spring set for FC mode
10 Pre-loaded spring for FO mode
Transport and storage
31