Charging The Device - Philips PR3733 Bedienungsanleitung

Charging the device

You have to charge the BlueTouch Pain Relief Patch before first use.
You also have to charge the device when its battery is low. When you
charge the BlueTouch Pain Relief Patch, it takes less than 5 hours to charge
the battery. When fully charged, the battery contains enough energy for
4 or more treatments. You can charge the BlueTouch Pain Relief Patch with
the adapter and USB cable supplied.
Note: You cannot use the BlueTouch Pain Relief Patch when it is charging.
Note: If the device is not fully charged when you start a treatment, the battery
may run out during the treatment. We advise you to always fully charge the
device before you start a treatment.
1 Insert the standard USB plug into the socket of the adapter.
2 Insert the adapter into a wall socket (100V-240V).
3 Insert the micro USB plug into the socket on the BlueTouch Pain
Relief Patch.
Caution: Only use this micro-USB socket to connect the BlueTouch Pain
Relief Patch to the mains for charging. Do not connect any other cable
with a micro-USB plug to this socket.
, When you connect the BlueTouch Pain Relief Patch to the mains,
it beeps once to indicate that charging starts. The charging light on the
connection panel flashes green slowly and regularly during charging.
4 When the battery is fully charged, the charging light turns solid green.
5 Remove the adapter from the wall socket and pull the USB plug out
of the micro USB socket of the BlueTouch Pain Relief Patch.
ENGLISH
11