Electrical Connection; Rear Spacers - AEG S74300DSM0 Benutzerinformation

34
Installation

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate corre-
spond to your domestic power supply.
The appliance must be earthed. The power supply cable plug is provided with a contact for
this purpose. If the domestic power supply socket is not earthed, connect the appliance to a
separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Directives.

Rear spacers

Inside the appliance you find two spacers which
must be fitted as shown in the figure.
Slacken the screws and insert the spacer under
the screw head, then retighten the screws.
A B