Programme Knob And On/Off Indicator Light; First Use; Set The Water Softener - Electrolux FAVORIT 30010 I Benutzerinformation

Rinse aid
1)
1) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling
with salt and rinse aid is necessary.

Programme knob and On/Off indicator light

• The selection of a washing programme occurs by turning the programme knob clock-
wise or anticlockwise, until the programme marker, placed on the knob, corresponds
with the desired washing programme indicated on the control panel.
The On/Off indicator light illuminates (position ON)
• To switch off the appliance turn the programme knob until the programme marker
corresponds with the On/Off indicator light. The On/Off indicator light turns off
(position OFF).
With the programme knob it is also possible to set the level of the water softener.

First use

Before using your dishwasher for the first time:
• Ensure that the electrical and water connections comply with the installation instruc-
tions
• Remove all packaging from inside the appliance

• Set the water softener

• Pour 1 litre of water inside the salt container and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent tablets ("3 in 1", "4 in 1", "5 in 1" etc... ) follow the
instructions given in "Use of detergent".
Set the water softener
The dishwasher is equipped with a water softener designed to remove minerals and salts
from the water supply, which would have a detrimental or adverse effect on the operation
of the appliance.
The higher the content of these minerals and salts, the harder your water is. Water hardness
is measured in equivalent scales, German degrees (°dH), French degrees (°TH) and mmol/l
(millimol per litre - international unit for the hardness of water).
The softener should be adjusted according to the hardness of the water in your area. Your
local Water Authority can advise you on the hardness of the water in your area.
The water softener must be set in both ways: manually, using the water hardness dial and
electronically.
Indicator lights
Illuminates when rinse aid needs to be filled.
33
First use