GM-Racing FLASH XXS Bedienungsanleitung Seite 8

REPLACE CHRYSTALS
1. Insert the receiver crystal in the slot provided
in one battery compartment as shown.
REPLACE STEERING SERVO
1. Insert the servo connector into the slot provided
on the vehicle (the slot on the top front of the
vehicle).
3. The parts (servo saver and pin) are from
part package 90120.6 and 90120.16
(see part list).
19
2. Make sure the crystal is securely placed before
installing the batteries.
2. Make sure that the servo is correctly installed
on the vehicle. Inspect all of the wires to
ensure they are undamaged.
4. Use a needle nose pliers to fasten the pin
onto the servo saver.
GM-Racing XXS Cars 4WD RTR