Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Chaser
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
LED Bar 288/5 RGB, you can select up to 8 chasers.
For example: To set the Fade Time, press the Encoder and turn it turn to choose Chase 8 s***f **. Note the
position of the cursor, which blinks immediately after the „f .Press the Encoder again to confirm the desired
menu option. To set a faster value, press the Encoder and turn it turn it clock-wise to increase the value and
counter-clockwise to decrease the value. Press the Encoder again to confirm.
Or:
To set the Step Time, press the Encoder and turn it turn to choose Chase 8 s***f. Note the position of the
cursor, which blinks immediately after the „s". Press the Encoder again to confirm the desired menu option.
To set a faster value, press the Encoder and turn it turn it clock-wise to increase the value and counter-
clockwise to decrease the value. Press the Encoder again to confirm.
DMX-Mode: Group
The LEDs on the front of the device are arranged in 8 evenly distributed square units. These can be grouped
in various manners.
Press the Encoder and turn it turn to choose: DMX Mode 8-Group/4-Group/2-Group/1-Group
8/4/2/1 represent the respective LED groups.
For example: 1-Group means that each LED unit makes up 1 group; 2-Group means that 2 LED units make
up 1 group; 4-Group means that 4 LED units make up 1 group; 8-Group means that all LED units make up 1
group.
Press the Encoder again to confirm the desired mode.
DMX-Mode: Channel
Every LED group occupies a 3-channel and a 6-channel mode. To set desired channel mode, press the
Encoder and turn it turn to choose: DMX Mode 3Channel/6Channel.
To choose the 3-channel mode, press and turn the Encoder counter-clockwise. Press the Encoder again to
confirm.
To choose the 6-channel mode, press and turn the Encoder clockwise. Press the Encoder again to confirm.
DMX-Protocol for 3 channels
Channel 1: Red
Decimal:
Percentage:
0 - 255
0 – 100%
Channel 2: Green
Decimal:
Percentage:
0 - 255
0 – 100%
Channel 3: Blue
Decimal:
Percentage:
0 - 255
0 – 100%
Feature:
Red LEDs from off to full on
Feature:
Green LEDs from off to full on
Feature:
Blue LEDs from off to full on
23/51
00032381.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
