Scrambler; Clock; Clock Setup - Kenwood TK-7180 Bedlenungsanleitung

S
CRAMBLER
Although the scrambler function does not offer complete privacy with your calls,
it does prevent others from easily listening in on your calls. When activated, the
transceiver distorts your voice so that anybody listening to your conversation will
be unable to clearly hear what you are saying.
In order for members of your own group to clearly hear your call while you are
using the scrambler, all other members must also activate the scrambler functions
on their transceivers. This distorts everybody's voice while transmitting and
corrects the voice message on your own transceiver when you receive the call.
To activate the scrambler, press the key programmed as Scrambler.
• The icon appears on the display while the scrambler is active.
To deactivate the scrambler, press the Scrambler key again.
Note: There are 2 options for using the scrambler. Your dealer can activate or deactivate the built-
in scrambler function of the transceiver, or they can add a more secure optional scrambler board to
your transceiver. Ask your dealer for details.
C
LOCK
If activated by your dealer, your transceiver can track the time and date with its
built-in clock. The time will display momentarily when the transceiver power is
turned ON. Additionally, you can view the clock any time by pressing the key
programmed as Clock.
Note: Removing the transceiver power for extended periods will cause the clock time to clear.
■ C S
LOCK ETUP
To set the year, month, day, and time:
1 With the transceiver power OFF, press and hold the C> key while turning
the transceiver power ON.
• The current year setting appears.
2 Press the
the month setting.
• Repeat this step, to cycle through the day, hour, and minute settings.
3 Press the S key again, to return to the year setting.
• A triple beep will sound, indicating that your selections have been set into the
transceiver memory.
4 Turn the transceiver power OFF and then back ON to return to Normal
Operation Mode.
22
and keys to select the year, then press the S key to cycle to