Herunterladen Inhalt Inhalt Diese Seite drucken

Ice-Cube Production; Cold Accumulators; Movable Shelves; Positioning The Door Shelves - Küppersbusch IKE327022T Benutzerinformation

Vorschau ausblenden Andere Handbücher für IKE327022T:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Place the fresh food to be frozen in the
bottom compartment.
The maximum amount of food that can be
frozen in 24 hours is specified on the rating
plate, a label located on the inside of the
appliance.
The freezing process lasts 24 hours: during
this period do not add other food to be
frozen.
When the freezing process is completed,
return to the required temperature (see
"FastFreeze Function").
In this condition, the refrigerator
compartment temperature might
drop below 0°C. If this occurs
reset the temperature regulator
to a warmer setting.
Storage of frozen food
When first starting-up or after a period out
of use, before putting the products in the
compartment let the appliance run at least
2 hours on the higher settings.
CAUTION! In the event of
accidental defrosting, for
example due to a power failure,
if the power has been off for
longer than the value shown in
the technical characteristics
chart under "rising time", the
defrosted food must be
consumed quickly or cooked
immediately and then re-frozen
(after cooling).
Thawing
Deep-frozen or frozen food, prior to being
used, can be thawed in the refrigerator
compartment or at room temperature,
depending on the time available for this
operation.
Small pieces may even be cooked still
frozen, directly from the freezer: in this
case, cooking will take longer.

Ice-cube production

This appliance is equipped with one or
more trays for the production of ice-cubes.
Do not use metallic instruments
to remove the trays from the
freezer.
1. Fill these trays with water
2. Put the ice trays in the freezer
compartment.

Cold accumulators

The freezer contains at least one cold
accumulator which increases storage time
in the event of a power cut or breakdown.

Movable shelves

The walls of the refrigerator are equipped
with a series of supports so that the shelves
can be positioned as desired.
For better use of space, the front half-
shelves (A) can be placed under the rear
ones. (B)

Positioning the door shelves

The model is equipped with a variable
storage box which is fitted under a door
shelf compartment and can be slide
sideways.
27
A
B

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis